2012년 6월 출시 / Core i7 프로세서 Turbo Boost 포함 / 최대 1 GB DDR5 비디오 RAM

423 질문 전체 보기

Why do I have no backlight after replacing the LCD?

Hello and thank you for you help!

I'm working on a friends Mid 2011 EMC 2353-1 MacBook (for free) because it seemed to be a simple fix. It had a slight crack in the glass cover of the LCD from being closed with something laying on the keyboard. A few moths later she reported the display stopped turning on. The laptop seemed to turn on and make the starting chime but still no display.

So taking a quick look at it with a flash light I noticed the backlight was the only thing not working so it must have just needed the LCD and glass to be replaced. I've done it before and it was no problem (I love my Ifixit tool and repair kit). After replacing everything and doing the test start I still have no backlight...

After doing some more research it seems that some similar models have some type of problem with a circuit on the mobo that can be replaced but none of the diagrams or forums really depicted or directed to one for this model.

Could anyone point me in the right direction of what to do next? Thanks again! -John

P.S.

I looked up the serial number and it says "EMC 2353-1", But it says "EMC: 2417" on the motherboards RAM slot.

Block Image

Block Image

Block Image

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

2.2 GHz Core i7 (I7-2720QM)

Intro Date: February 24, 2011 Disc Date: October 24, 2011

Order No: MC723LL/A Model No: A1286 (EMC 2353-1*)

Subfamily: Early 2011 15" Model ID: MacBookPro8,2

Std RAM: 4 GB Std VRAM: 1 GB*

Std Storage: 750 GB (5400 RPM) Std Optical: 8X DL "SuperDrive"

*Please note that these identifiers refer to more than one model. In this case, please also note that the EMC number is not externally listed on the notebook so it cannot be used readily for identification.

의 답변

의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

2개의 답변

John Small, first you want to check your backlight fuse F9700 for continuity, then check the components around your LED driver U9701. Let us know what you find. Hope this helps, good luck.

Block Image

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Hey, I'm having the same problem with a 2010 A1286 I own but the logic board looks nothing like that. I think I blew the backlight fuse by connecting a bad cable. How do I find out where the F9700 fuse is located on my particular board? Here is the pic.

http://postimg.org/image/wjlsb94od/

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

John Small 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,027