Mac doesn't start after installing SSD
I followed the guide to install an additional SSD in my iMac (27'', mid 2011). After I put everything back in place, it won't start. When I press the power button, the fans start to spin for a short time, then stop, then start again, and so on.
Is there any indicator to figure out what's wrong? I checked all connectors I disconnected when disassembling, they're all back in place.
좋은 질문 입니까?
댓글 8개
I have the same problem. Did you figure out what was wrong? Please help me..
cisco.fernandes 의
I'm having the same issue. How did you solve your problem?
Neilson 의
@fixitm - What do the diagnostic LED's tell you? Review Djh145 for more information on them.
Dan 의
i only have led 1 , but when i press the power button, led 1 turns off.
Neilson 의
Lets try again,
The LED's we are talking about are the ones inside the system (Diagnostic LED's). Is that the LED you are talking about here LED #1 ?
Dan 의
댓글 3개 더보기