주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

2009년 중반기 모델 A1278 / 2.26 or 2.53 GHz Core 2 Duo 프로세서 EMC 2326

929 질문 전체 보기

Headphone jack/socket screwed or just soldered?

Hey folks,

today I have accidentally pulled on the chinch cable which was connected to the headphone jack of my MacBook Pro 13". I am now a little worried that the headphone socket maybe got loose or damaged. From the outside it looks all tight and also seems to work flawless. But I do not want the headphone jack to stop working in a few weeks or so. First and foremost because I have the Book just a few days yet.

Does anyone of you know how the socket is attached to the logic board? Is it just soldered or also screwed or maybe hold by some little staves sticked through the logic board? If the soldering would be broken, would I definitely recognize it?

Please excuse if my english is not perfect, I am from Germany. Looking forward to your answer!

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

SKIP THE UPGRADE

Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits

SKIP THE UPGRADE

Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits

답변 2개

선택된 해법

If I remember well each rear side of the square socket is soldered to the logic board and the audio lines are also soldered to the board. That's pretty solid since the port front part is adjusted in the unibody case so I don't think the socket could break so easily. But be aware that if you break the headphone tip inside the audio port then the broken part stuck inside the port is not easy to remove. There were many questions here on this subject and I didn't see a clear answer yet.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

Thanks for your answer. But I think you are not quite right. The front part of the socket is definitely not adjusted inside the unibody. This was also my first thought because the plastic seems to be sticked through the howl. But if you look at the pictures of the logic board here on ifixit you can see that there is no such part on the socket which could be pulled through or adjusted in the unibody. So this has to made with two seperate plastic parts.

의견 추가하세요

It's a pain to remove these smd's socket. But yea, it's pretty rock soldered onto the logic board.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

John 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,979