평판: 1
1
Hi Ifixit, i replaced the volume and headphone jack cable and earpiece, then assambled the iphone.. but now it doesn't turn on so i connect the usb charger and it only vibrates twice.
I check all connectors (screen/digitizer/camera) and it seems well connected.
Any solution?
Thanks.
좋은 질문 입니까?
평판: 61
2
3
Is it recognized by iTunes when you plug it into your PC? It could be in some sort of recovery or DFU mode. When you try to turn it on, hold down both your power and home buttons together for 15 to 30 seconds and see if it boots. If it's stuck in some kind of recovery mode that should kick it out and let you use it normally. Other than that, if it's not your screen cable I 'm not sure what it could be.
해당 답변은 도움이 되었습니까?
평판: 37.6k
22
51
42
Doubt it's in a recovery mode just sounds like a damaged or screen connections are plugged in correctly
해당 답변은 도움이 되었습니까?
yes, i've been searching an apears to be the screen, so i'm going to borrow one of a friend to replace it and see whats happen.
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 722
