White screen with lines after touching the Silentbutton cable

Question

iPhone 4S

5세대 iPhone. 수리는 간단하며 스크루드라이버, 비집는 도구 그리고 인내가 필요합니다. GSM/CDMA / 16, 32, 또는 64 GB / 검정색 또는 흰색.

2193 질문 전체 보기

tarsonis @tarsonis

평판: 1

2

게시일: 2014년 11월 23일

옵션

White screen with lines after touching the Silentbutton cable

Hi there,

I had to change my headphonejack. Everything went fine. I could use my headphones again. After a while the silent switch didn't lock right in place. I opened the back and replaced the cable (just touched it with a repair tool) after that the silent switch worked but the screen showed white with many moving lines.

I had this befor and the only solution was to replace the display.

Why is that? I didn't touch the display or the display cables itself?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

답변 1개

computeripodrepair @computerip58588 평판: 601 12 4 1 · Answer 1 · 2014-11-23T21:58:21-07:00

computeripodrepair @computerip58588

평판: 601

12

4

1

게시일: 2014년 11월 23일

옵션

I would try disconnecting the battery and then disconnecting and reconnecting the display and digitizer connections to the motherboard. Then reconnect the battery again and power on the phone. Also inspect the digitizer and display cables and check to see if they have any damage and are connected properly to the motherboard. Hope this helps.

Look at step 17 for LCD and digitizer connections: iPhone 4S Screen Replacement

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기

iPhone 4S

White screen with lines after touching the Silentbutton cable

답변 1개

귀하의 답변을 추가하세요