주요 콘텐츠로 건너뛰기

A compilation of guides for counter-top and handheld blender repair.

343 질문 전체 보기

Plugged my Cuisinart CSB-76 Hand Blender into a 220v power source?

I plugged my 110v hand blender in a 220v power source. It made a flash, and never turned on again, so we can assume its burned, right?

What exactly was damaged?

Is it possible to fix it?

How?

Where do I buy the parts needed to do it?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

hi dude, i did the same. could u pl tell what happened to the motor and how to solve the issue

댓글 달기

답변 1개

선택된 답변

pedro, the only way to determine exactly what has overloaded is by taking the blender apart. Most likely it is the caps (potentially a fuse on a circuit board) or even the motor. But, you'll have to take it apart to see what needs to be replaced.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

Hi oldturkey!

Thank you for your message!

So do you think I should take it apart? I am not very experienced in doing stuff like that, but, on the other hand, I don't think I have another choice...

I will open it and post the photos soon!

I definitely would take it apart. Take lots of pictures so you know what goes where. then take a couple of hi-res images of the electronic components and post those to keep us informed.

hi dude, i did the same. could u pl tell what happened to the motor and how to solve the issue

댓글 달기

귀하의 답변을 추가하세요

pedro 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,137