기기를 수리하세요 커뮤니티 상점

아우터는 쌀쌀한 날에는 몸을 따뜻하게 해 주고 축축한 날에는 젖지 않게 해줍니다. 수선 난이도는 간단한 꿰매기부터 복잡한 칸막이 수선까지 다양합니다.

171 질문 전체 보기

옵션

replacing cord in hood

Dear ifixit,

I just bought a brand new Patagonia Northwall jacket in paintbrush red. Unfortunately, I don't like that the draw cords in the hood and waist are the same color as the jacket. It's part of the Touch Point system that has an embedded cord lock sewn into each side of the hood and hem. In order to replace the current draw cords with a black or grey drawcord, is there anyway I can achieve this without having to remove the stitching? I don't think anyone has ever requested something like this before. Thanks.

Regards,

larry

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Cord locks like this can be removed by squeezing them to the open (adjust) position and pulling the cord through the lock.

After the lock is removed you can thread a new cord through the channel by either securing the new cord to the old with a safety-pin, or a few wraps of scotch tape (don't make the wraps too think) and working it back around to the other side.

Reverse the removal steps to replace the lock.

If this answer is acceptable please remember to return and mark it accepted.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

Thanks. I hope this works.

의

댓글 달기

귀하의 답변을 추가하세요

larry 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 42

전체 시간: 5,532