주요 콘텐츠로 건너뛰기

모델 A1369, 1.6, 1.7, or 1.8 GHz 프로세서, 64, 128 또는 256GB 플래시 저장공간

328 질문 전체 보기

Power passed to MacBook air through USB port

In an attempt to upgrade firmware to one of my GoPro gimbal, I connected with batteries to USB port and switched on the gimbal, MBA went off immediately and never started. What can go wrong or how to restore?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 1개

Post a couple of High-Res images of your logic board with your question. It sounds to me like you overloaded the USB circuitry and may hopefully just blown up a few components.

댓글 달기

답변 1개

선택된 답변

It sounds like something more than a powered device issue.

What normally happens is the fuse link at the USB port burns out but the data connection still works. It sounds like the power was feed to the USB ports data lines.

Have you tried doing a hard reset to see if the system recovers. If that didn't work you may have killed your logic board.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

Hard reset didn't respond.

댓글 달기

귀하의 답변을 추가하세요

badri 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 100