기기를 수리하세요 커뮤니티 상점

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기

옵션

How to replace/desolder iPhone 5 SIM card reader?

Hello,

My iPhone 5 always seems to say "No SIM" even when inserting several SIM cards and cleaning the tray and internals. I strongly believe this is a SIM card reader fault, hence please may I ask how I would do about de-soldering and soldering on a new SIM card reader on the iPhone 5?

I looked at several resources online and they have given me a general idea since there aren't many guides online, hence could I please ask you guys for more specifics on how-to? I apologise for the bother.

Thank you ever so sincerely! :)

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 8
댓글 달기

답변 6개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Alright, I guess I'm gonna throw my hat into this crisis of misinformation. So, OP, if you don't have a smd work station and experience in soldering, this is not for you. What you should do is look into a GOOD board repair shop that can do this, and if that's worth getting a used iPhone 5. The phone that's next on the list to become extinct. Sounds like a $75 purchase on Craigslist. This particular repair would be difficult, especially because of the plastic components. I do have a technique for this, but still, not easy. Not for a beginner for sure. The only person who made an ounce of sense was that David F guy. The rest are not things that remotely make sense

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기
가장 유용한 답변

옵션

It is not an easy task the problem are the 2 solderpads hidden under the sim contact made in a plastic frame

해당 답변은 도움이 되었습니까?

예 아니요
점수 3
댓글 달기

옵션

If you have to ask i don't think you will be able to do it, it's not easy to resolder such a tiny component. My bets advice to you is get an old circuit board, I use a RROD Xbox 360 and practice soldering onto it.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

https://www.youtube.com/watch?v=7o6f_zq2...

This video showed it pretty good for me atleast! Hope you all the best!

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

That video didn't show how to do anything. However, I just started looking into this but I imagine you wouldn't actually "solder", you'd use a heat gun. Any time there's multiple solder points, it's usually best to use a heat gun to soften the solder.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

I suggest to bring the unit to iPhone service center and let them fix it for you.they were more competent than us since it was their kind of job

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 2개:

How much would that cost?

의

They don't microsolder at Apple. They sell you a new phone

의

댓글 달기

귀하의 답변을 추가하세요

Arif Ullah 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 24,860