주요 콘텐츠로 건너뛰기

모델 A1286. 2011년 2월 출시 / 2.0, 2.2, 또는 2.3 GHz 쿼드-코어 Intel Core i7 프로세서

586 질문 전체 보기
질문 마감됨

rebuild "L" magsafe connector that clips to laptop for charging.

its the "L" magnet thing that clips to the laptop to charge the battery and power the thing.

say heisenberg didn't like my "L" adaptor and melted the tip thing in acid. and its gone gone. only the cable is left.

is there a way to hack a cord or cable or something to at least be able to charge the lap top.

i've tried sticking live wire on the lil copper ports for the pins, but nothing,

i did notice in one picture, it goes, pos neg adaptor sensor pos neg. ( for the lil pins. )

but can someone give me a way to charge my macbook, even if its taking the battery out and straight hack charge that..

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Look here.

I would be very cautious about applying power directly to a Li-ion battery - explosions (with acid burns) and fire can result.

Soldering these devices is also challenging and requires special irons, solder with lots and lots of practice. (From your question I think you may already have learned this).

A charge adapter costs between 20 and 80$ US. Go the safe route and get a replacement.

If this answer is acceptable please remember to return and mark it accepted.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 136