주요 콘텐츠로 건너뛰기

Model A1059 or A1099 / 20, 40, or 60 GB hard drive / touch sensitive click wheel

227 질문 전체 보기
질문 마감됨

Replaced battery but iPod does not charge

Changed the battery.

Connected orange ribbon cable connecting the headphone jack to the logic board.

Connected white battery connector back to the logic board.

What I get is a sad-faced iPod image on the screen has the apple.com/support/ipod link. This image alternates with the Apple logo.

I hear a 1-second spin sound, followed by a short click sound.

What else can I do?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

natalia, " sad-faced iPod image on the screen has the apple.com/support/ipod link." and "I hear a 1-second spin sound, followed by a short click sound" sounds more like a hard drive error than a battery error. Run the diagnostic menu and see if it lets you access the hard drive. Here are great instructions about how to enter the diagnostic mode and what the results mean.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

Thanks for useful resource link, oldturkey03!

Unfortunately, the iPod won't stay on -- even connected to an electrical outlet -- long enough to start the diagnostic test.

Any other options?

Gratefully.

natalia, try another battery and see if that makes a difference. Also, consider purchasing a USB adapter which will allow you to use your iPod's HDD as an external USB drive. See if you can access the drive. Not sure where you are located, but I do have a couple of logic boards and drive adapters. If you need to, I am willing to take a look at your iPod. Free of charge.

Swapped out old battery with new one.

Will try a USB adapter that you mentioned.

Thanks for continued ideas!

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 155