평판: 1
1
Inside my MacBook Pro 15" (Early 2008, model A1260) there are 2 screws that hold down the hard drive retaining bracket. One of the screw heads broke off, leaving the entire screw in the bracket with nothing to cling onto. I am now unable to remove the screw, which in turn won't allow me access to remove the hard drive. Is there a way to remove the broken screw?
좋은 질문 입니까?
평판: 35.1k
140
71
53
Is the head completely gone or is the torx "round" ?
whe the head is completely gone, it would be the easiest thing to remove the drive - without the head - it can hold nothing
but when the head is still there, but round - use a screwdriver that almost not fits on the screw (a little bit larger than the round hole) - press it in the screw and screw carefully - that way i always get the dead torxes out (ok, to be honest - i do something more often than others and in hardes cases - i use my dremel ;-) )
해당 답변은 도움이 되었습니까?
The screw head completely broke off. The screw stem is screwed into the retaining bracket holding it securely in place.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 2,380
