주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기

Sleep button broken, still clicks

I have an iPhone 3G which (after too many drops floor) doesn't have a working sleep button.

The button still "clicks" so it seems like it is something else.

I did take the phone apart and put it together again with no luck.

Do anyone of you know what I could do and/or what parts to replace?

I did the mistake of upgrading to iOS 4 to jailbreak it (not sold in my country) but I'm not able to without getting into DFU mode, which needs a working sleep button, soo I have an expensive device which only displays the iTunes logo :s

Thanks,

Gunnar Steinn

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

선택된 답변

I had the same problem with my 3G. What I ended up doing is buying a new headphone jack to replace the old one. The button that the power button knob presses against is attached to the headphone jack. I bought it for about $9 on eBay. The power button functioned again after installing the new headphone jack. The guide to do this is found on the ifixit website.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Thanks, I'm going to try that!

In the meantime I was able to activate the phone with an AT&T sim so I can at least use it as an iPod.

댓글 달기

귀하의 답변을 추가하세요

Gunnar Steinn 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 3,416