I followed the iFixit camera replacement guide and after I finished it the phone wouldn't turn on. So I changed the camera back to the original. And it still wouldn't turn on. I double checked the steps. And still no luck. Can someone please help me?
좋은 질문 입니까?
평판: 73.8k
19
111
82
Maybe you forgot to turn the device off. Disconnect the battery and power up again.
해당 답변은 도움이 되었습니까?
Thanks for your help. I tried what you said with still no luck. I read through the article again and it said if you put the wrong screw in the wrong hole it can cause severe damage to the logic board causing boot disfunction. That's most likely what I've done. After that I made sure the right screws were in there place. And disconnected and reconnected the battery. With trouble still.
평판: 2.1k
8
25
1
Have you tried starting it up without the camera plugged in?
else if you have mixed up the screws on the shield which covers the lcd/digitiser/front camera, you could have damaged the traces
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 488
