주요 콘텐츠로 건너뛰기

The Kenmore Elite HE3 is a washing machine by Kenmore.

668 질문 전체 보기
질문 마감됨

clothes stay wet at end of cycle

The spin cycle seems to be short. Makes a clunking sound then stops and only tumbles clothes. I replaced pump,cleaned drain basket,checked ball...etc. all good. Have to operate the drain spin cycle with extended spin to get them somewhat damp.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

Is the washer level in all directions?

댓글 달기

답변 1개

선택된 답변

Motor Coupling

If the washer won't spin the motor coupling might have failed. The motor coupling connects the motor to the washer transmission. It is designed to fail if the washer is overloaded in order to protect both the motor and transmission. Another common problem is the lid switch.

Clutch

If the washer won't spin, the clutch assembly might be worn out. The clutch assembly makes the connection between the transmission and the inner tub. It is designed to allow the tub to get up to the proper spin speed gradually. As the clutch wears out it may prevent the tub from spinning. The clutch is not repairable, if it is loud or not working properly it will need to be replaced.

Clutch Band Kit

If the washer won't spin, the clutch band kit might be worn out. The clutch makes the connection between the transmission and the inner tub. It is designed to allow the tub to get up to the proper spin speed gradually. As the clutch wears out it may prevent the tub from spinning. If the washer won't spin, this clutch band kit may need to be replaced.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 365