주요 콘텐츠로 건너뛰기

모델 A1225 / Early 2009 / 2.66, 2.93, 또는 3.06 GHz Core 2 Duo 프로세서

178 질문 전체 보기

I INSTALLED SSD CRUCIAL HDD Now SCREEN STAYS BLACK

Hi I installed new SSD crucial 1TB HDD in my 2267 3.06Ghz iMac and after install when powering on the boot up sound occurs, but no screen image or backlight coming on at all. formatted and restored a time machine backup to the new drive and used it to boot up my MacBook Pro. screen power and lcd temp and lcd connector cables are attached well.

Any suggestions? Thank you in advance!!

Regards,

Pal

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

선택된 해법

Was the machine working before you installed the hard drive? Have you tried putting the old hard drive back in? With the frame off, look at the LED diagnostic light to the right of the RAM slots and tell us what you find. What are the last four figures of the serial number on the MacBook Pro you used? The same on the iMac (from the bottom of the stand). What OS X did you install? Was the Time Machine backup from the iMac or the MBP?

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

crashingtiger 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 458