주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2521 질문 전체 보기

iPhone 5 with an Error 4003

An iphone 5 with a new screen replacement stopped working after 3 days. Now I need to connect with itunes according to the iphone and when I do, I get an error 4003. I tried several lcd's including original apple, different docks, front camera's but nothing works. Also tried DFU mode.

Can someone help me?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 3개

Errors in the range of 4000-4016 have to do with issues involving the USB connection or security software.

Check USB connections

If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.

To narrow down the issue, you can also change up your hardware:

Use another USB cable.

Plug your cable into a different USB port on your computer.

Try a different dock connector (or no dock).

Add (or remove) a USB hub between your device and computer.

Connect your computer directly to your Internet source, with no routers, hubs, or switches.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

When I disconnected the rear camera and recovered in DFU-mode this worked! I put on a different rear camera and it is still working. So my problem is solved.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

It could be one of 2 things the camera or the camera chip the camera isn't hard to fix the chip is thx

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

IDABO 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 11,055