주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기

Can I replace screen this way?

I have a CDMA iPhone 4 with a cracked screen.I also have a GSM iPhone 4 with a perfect screen. Can I use the GSM screen to repair the CDMA? Or is there a way to switch the GSM to CDMA so that I can use it with Verizon? It has a customized color conversion kit on it and 16g memory whereas my CDMA is just factory white with only 8g of memory. I am locked into a contract with Verizon and am trying to explore my options with these devises.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 2개

선택된 답변

Actually the first answer is totally incorrect and false. You can infect do that you just have to remove the bezel frame from around the glass. just heat it up a tad and take knife and cut from up to down on both sides between the frame and glass. This should slightly separate it. now just take ur nail and pry the two apart just a small amount of adhesive usually attaches the two. Then just a little of adhesive back on the frame and put it on the other one u did the same to. easy takes less than 5 minutes. SPAM removed

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

I knew there was a way. Thank you cracknship and oldturkey03. I was told I could also switch the mother-boards, but I am unsure if this will switch CDMA and GSM capabilities.

댓글 달기

No for both questions. CDMA and GSM on iPhone 4 are unique to each iPhone 4, no conversion possible. The screens have different mount bracket, with different screw locations. Best to get proper screen.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Krista 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 77