주요 콘텐츠로 건너뛰기

Repair and disassembly guides for Netgear routers.

29 질문 전체 보기
질문 마감

Why netgear range extender is not working?

I bought a Netgear WNDR3400v2 to replace my older router. My netgear wifi extender suddenly won't pick up the connection of the new router! I'm sure there's something I'm doing wrong but what? None of the devices in the house will connect to the extender.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글:

i am having the same issue.. please help

의 답변

Reset the extender using the reset key at the back of your extender .

Reconfigure the range extender and check your modem for internet connection . for more Steps Visit https://fixingblog.com/setup-netgear-ran... see if that helps you

의 답변

If you are trying to install your extender for the very firs time you have to place your extender near to your router.

http://www.mywifiext.xyz

의 답변

Get free problem diagnostics of all issues related to New Extender Setup, NETGEAR Genie Setup, Mywifiext.net Login/Setup or other NETGEAR devices setup on toll-free . Or fill in the form given below to reach out to us. We will respond you as soon as possible. via https://mywifiexte.net

의 답변

4에 댓글 더 나타내기

의견 추가하세요

4개의 답변

가장 유용한 답변

What is it hooked up to, Mac or PC? Did you install the new software for this model or are you using the old software?

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

If you are having difficulty with your Netgear Extender i’ll suggest you for the actual setup you need to plug the Extender near to the Router and once light will be green on the extender then press the (WPS) button on both extender and router at the same time and wait for 1-2 minutes and it will show you all green light at the front that means its working.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

The wireless router should be connected to the power source. When you wait for 60 seconds or so, the router will probably be entirely working.

• The wireless router and the personal computer need to be connected through an Ethernet cable.

• To be able to logon to the router, you should use your own web browser. Once you start the web browser, type the default IP in the address bar. You can find the IP of the wireless router in the documentation provided by the maker. Generally in most of the conditions, the wireless router IP can be 192.168.2.1, 192.168.1.1 or 192.168.0.l

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

I want to suggest you, kindly check your extender, Is there any hardware damage, it cause to '''netgear extender stop working'''. Reset your extender

Verify netgear extender connected with router.

Antennas connected properly

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Open mywifiext.net for Netgear extender login in windows & mywifiext.local in MAC OS. Call us or Chat with us, if WiFi netgear_ext login is failed. For More info - https://mywifiexte.net/

의 답변

의견 추가하세요
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 912