Skip to main content

2010년 4월 출시 / 2.4, 2.53 GHz Core i5 또는 2.66, 2.8 GHz Core i7 프로세서

591 질문 전체 보기

My MacBook wont turn on after battery damage

Hi, after 10 months of not using my macbook I decided to use it again and charge it, the next day after I charge it, the battery got swollen very bad it even knocked the touch pad out of its place, I took off the back cover and removed the battery, then I connected the power adaptor but the macbook didnt turn on, at 1st the light on the power adaptor was on but after a few tries it went off and never came back, now whenever I connect the power adaptor the only thing that turns on is the "battery indicator thingie" light, it flashes a few times when I press the button...

please help

Thank you

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

1개의 답변

가장 유용한 답변

Unplug trashed battery. Hold power button down. Keep holding power button down. Then plug charger in, with power button held down. Does it turn on?

해당 답변은 도움이 되었습니까?

점수 1

댓글:

No, it didnt, the only difference is battery indicator didnt lit while doing what you suggested

의 답변

Measure voltage on PPBUS_G3H, PP3V42_G3H, PP5V_S5 and PP5V_S3 on your logic board. Red probe on point where voltage shows up, black probe on ground.

Then switch multimeter to diode mode. Red probe on ground, and black probe on the following points; measure SMBUS data line ends of R5280 & R5281 WITHOUT battery or charger plugged in, using diode Should be 0.435-0.461 on a non-&&^&@@ up board.

You will need a multimeter, schematic, and boardview for your specific logic board model number to begin this journey. If you are willing to follow along, I can help you troubleshoot the problem, learn something, and save a lot of money. If this seems like a nightmare, give up and buy a new machine.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

IzeQ 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 133