Skip to main content

A handheld, user-friendly electronic label maker manufactured by Brother.

1 질문 전체 보기

My unit wont turn on

I already replaced the ac adapter with a new one and the machine still won't turn on. I don't use the unit with batteries at all as it drains the batteries very quickly.

the screen remains blank. any suggestions?

Update

so i tested it out today with batteries and the unit turned on! Which makes me think something is wrong with the metal prong that attaches to the adapter. I also tested my adapter with my dvd player and it worked. So now I know what the problem is but can this be fixed? It looks fine to me; is not loose or broken.

Block Image

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글:

i have the PT-D600 that wont turn on, or do anything at all..

의 답변

의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

3개의 답변

가장 유용한 답변

noosheen, start by opening it up using these guides. Then use a multimeter and plug your power adapter in. Measure the voltage on the solder points of the jack on the logic board. It is possible that it has broken off, that you have colder solder joints or that the jack itself has failed.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

REFER TO THESE it seems

SOMEONE MAY HAVE DROPPED IT. SOMETHING SEEMS BROKEN.

Brother PT-D200 Troubleshooting

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

I have bought 2 adapters and both do not turn on the machine. I have also put in 6 brand new batteries and still won't turn on.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

noosheen 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 1

지난 7일: 13

지난 30일: 54

전체 시간: 3,260