USB connection breaking when plug moved or wiggled as when on lap.

On the first page of the guide, you'll see a list of four Relevant Parts. These are for the four different speed machines. Click on the appropriate one to go to the correct part. The first one looks like this: [연계 제품이 누락 또는 비활성화 됨: IF155-010]

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 3개:

+

rj713 의 2010년 9월 25일

Thank you Mayer for the rapid response, sorry I have been slow in acknowledging your effort.

I had no idea that the two USB ports on this machine are not directly related.

Actually I thought they were both soldered onto the mother or logic board.

I have received another response aimed at fixing the port on the other side of the machine which apparently does have to be soldered.

I really do not know how I have managed to mess up both USB ports but I do carry a trackball mouse and portable HD which I am unpluging and plugging in all the time.

At any rate now I know what has to be done. I was in hopes there would be a way of either bending the tangs up or down for better contact and or using a rotary switch cleaner to etch and lube the ports for better contact.

Rest assured that I will be very careful with the ports until I can effect a repair.

Regards,

Ken

krlore 의 2010년 7월 17일

Glad I could help.

mayer 의 2010년 9월 25일

댓글 달기

Thank you Mayer for the rapid response, sorry I have been slow in acknowledging your effort.

I had no idea that the two USB ports on this machine are not directly related.

Actually I thought they were both soldered onto the mother or logic board.

I have received another response aimed at fixing the port on the other side of the machine which apparently does have to be soldered.

I really do not know how I have managed to mess up both USB ports but I do carry a trackball mouse and portable HD which I am unpluging and plugging in all the time.

At any rate now I know what has to be done. I was in hopes there would be a way of either bending the tangs up or down for better contact and or using a rotary switch cleaner to etch and lube the ports for better contact.

Rest assured that I will be very careful with the ports until I can effect a repair.

Regards,

Ken — krlore

PowerBook G4 Aluminum 17" 1-1.67 GHz

USB connection breaking when plug moved or wiggled as when on lap.

답변 1개

귀하의 답변을 추가하세요