주요 콘텐츠로 건너뛰기

The PlayStation 3 (or commonly known as the PS3) is the third home computer entertainment system produced by Sony Computer Entertainment, and the successor to the PlayStation 2. It was released November 11, 2006

780 질문 전체 보기

Why do I still have YLOD after attempted repair?

I followed the YLOD repair video to the T and upon its completion I still have the YLOD :(

please help as I don't know what else to do. I've read elsewhere that the chips have to be re-soddered but I don't know.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

guitarology, first you will have to remember that there are a few things that can cause the YLOD. A few of them are:

A dead or disconnected HDD

Cold-Joint between the CPU/RSX/EE(If your console has one)

A dead power supply

Overheating

Corrupted NAND Flash

Even reflows are only limited. YLOD (as well as RROD on a Xbox) are caused by the design of the processor, not by bad or cracked solder joints. You most likely have issues with your GPU processor. It is a flip chip design and the issue could be the solder bumps between the IC and the substrate. A reflow might fix it for a while.Even reflows are only limited. YLOD (as well as RROD on a Xbox) are caused by the design of the processor, not necessarily by bad or cracked solder joints. The only repair that would fix it permanently is a new BGA. Try this repair again and you may have to change the approach a bit by adjusting the heat. It is a hot or miss situation and most first time failure with this is caused by not applying to much heat, whereas to much will totally remove the IC's.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

guitarology 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 5

전체 시간: 645