주요 콘텐츠로 건너뛰기

The HTC One (codenamed M7) is HTC's 2013 flagship smartphone. It features a seamlessly designed unibody aluminum frame, large dual front-facing speakers, and a 4.7-inch 1080p display.

149 질문 전체 보기

camera and volume button not working after reassembly

Hi there,

I successfully replaced the LCD on my HTC M7 following the guide. Everything worked until my LCD stopped working probably cause it was a bad quality aftermarket product. I bought a new LCD assembly and replaced it again.

After installation, everything worked fine except the camera app wouldn't start (I reinstalled the whole ROM, and it still didnt work so I thought it's a hardware issue). So I disassembled the phone again, took out the daughterboard to check if I accidentally ripped something or broke something on it, but it didnt seem so.

I reassembled the whole phone again, but this time not only the camera wouldnt work, but also the volume button didnt react. I tried bootloader mode too, but the volume buttons still didnt work. Any suggestions?

Could it be any of the cables that connect the daughterboard to the motherboard? Ambient light sensor, jack plug, upper loudspeaker all work so Im hoping I dont need to replace the whole daughterboard. Any tips? Thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

The camera it self most likely needs to be replaced, electronics are extremely sensitive to static discharge it takes only about 10 volts to fry microchips. humans can not perceive static electricity until it reaches around 1,500 volts.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Istvan Weyda 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 128