주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

iMac Intel 27" EMC 2309 (Late 2009, Core 2 Duo 3.06 또는 3.33 GHz) ID iMac10,1, EMC 2374 (Late 2009, Core i5 2.66 GHz 또는 Core i7 2.8 GHz) ID iMac11,1

513 질문 전체 보기

How to fix ethernet plug recognition?

Hello,

When I plug an ethernet wire (plugged to a switch with a printer, wifi access point, etc) the network is not recognized. On the Network configuration, the Ethernet dot is still red. And on the switch, the lignt in front of the Quad Core iMac line is off... I used several wires, the several ports of the switch, but nothing...

Under Mac OS X 10.6.4 I see the en0 device, under Windows 7, I see the Broadcom card (but still unconnected) and everything seems alright... Except that when I plug it does nothing...

Any idea ?

Thanks in advance,

And sorry for my poor english.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

필수 도구 키트

최고의 소형 키트에서 가장 유용한 도구.

지금 쇼핑하기

필수 도구 키트

최고의 소형 키트에서 가장 유용한 도구.

지금 쇼핑하기

답변 2개

선택된 해법

either the nic on your mac is bad or your switch is bad.

if the port that your printer is plugged into is working try plugging your mac into that port.

If it still does not work and your sure your cable is good then your nic is faulty.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

what's a nic?

Hi Richard--network interface card--a windows device primarily. Ralph

Well, it seems that the nic is dead... Well, what now... Can I change it myself, or is it included on the motherboard ?

의견 추가하세요
가장 유용한 답변

If this is indeed a Late 2009 machine, it's still covered under warranty and Apple will repair it for free.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

Thanks for the tip...

의견 추가하세요

귀하의 답변을 추가하십시오

Matthias Lamoureux 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 2,224