주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Can't boot, only apple logo then turns off.

Hi all,

I have an iPhone 5s 16GB which boots only to the Apple Logo for 10 seconds, then black screens for about 30 seconds and turns off. While in black screen mode, the backlight is still showing.

Prior to the incident, the screen was replaced along with the front cam and sensors, it was working for like few hours, then all of a sudden it turned off and the incident happened.

Trouble shooting:

Tried replacing the battery (original) = no luck,

Putting an original iphone 5s screen with original front cam and sensor = no luck

(with the original touch ID)

looked under a microscope, there seems to be no physicals of circuit board damage.

don't want to remove the shields until I am sure what the issue is.

I appreciate any help and tips.

Thanks.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 2개

Good call not removing the shields! Have you tried reseating the display and digitizer connections? Mobile Apple products tend to freak out when they fail the hardware test that occurs during bootup.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Hey thanks for your reply, I tried everything, even went with all original parts from another iPhone. If I find an answer, I'll have it posted for anyone who may share the same problem.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

NUTELECOM P 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 247