주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기
질문 마감됨

Back camera and back flash/LED not working (even after replacements)

I replaced the dock connector a few months ago and afterwards the back camera stopped working as did the flash/LED. The front camera is working fine as is the rest of the phone.

When I start the camera app the screen is black and the app crashes when trying to take a pic (other camera apps behave similarly). I can switch to the front facing camera in camera apps, but switching to the back camera again usually crashes the app. The backward facing flash/LED also is not working (e.g., when I turn on the flashlight app the button merely turns itself off again).

The back camera and LED didn't seem to be logically related hardware faults, but I did replace the flex cable (with the LED–no small feat!) and the back camera. Despite the fix, the faults with the back-facing camera and flash/LED persist (everything else is working fine.

Is this a problem with the board? I've tried hard restarts, but glad to try anything else that might come to mind :)

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

It seems like there may be some components damaged or knocked off the board. I would look around the areas where the flex cables for the rear camera and flash connect to the board. You may need some sort of magnification so you can see better.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Thanks! I'm going to cope without the camera for the time being, but I'll have a closer look next time I open it up.

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 601