After following the HP Photosmart D110a Scanner Glass Replacement tutorial and reassembling, the printer won't turn on.
All wires were reconnected and the power button face was reinserted.
I was not grounded when I disassembled the printer.
좋은 질문 입니까?
평판: 85
2
Disassemble the printer as you did when replacing the glass, there is a small cable that you need to make sure is connected properly. Recheck all flex cables. Being grounded will not short the printer out. Test outlet also with a lamp, be sure outlet works.
Matthew Lucas
해당 답변은 도움이 되었습니까?
Rechecked flex cables and tried a different outlet. Printer powers on again.
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 149
