주요 콘텐츠로 건너뛰기

2011년 10월 24일 출시 / 2.2, 2.4, 또는 2.5 GHz 쿼드-코어 Intel Core i7 프로세서

405 질문 전체 보기
질문 마감됨

Computer is not turning on, might have fried the logic board

Hello

My Macbook Pro 15" 2,2 GHz i7, from 2011, needed some repairs. So I decided to take it apart to have a look at the inside.

But, things didn't go so well. I used what I thought was a spudger, even though I new it wasn't a spudger, but a metal thing.

It gave a spark, smoked a bit, smelled a bit burnt and after that I could turn it on.

So, do you think I fried to the logicboard? Or could it be something else?

I know how stupid I was, so don't tell me!

Thanks, and good day!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

How about posting a couple of images of your board to may be identify what you shorted out? 기존 질문에 이미지 추가하기

댓글 달기

답변 3개

선택된 답변

If it ain't broke, don't fix it!

Si fractum non sit, noli id reficere!

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기
가장 유용한 답변

Can you see any where on the main board that looks burnt? Look at the little board in the corner where the charger plugs in. What does it look like? If it's just the little corner board then you may be okay. If it shorted the main board you may be borked.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

you shorted something for either a low voltage S0 rail for a large chip which is made to power low impedance loads, or PP3V3 which is a resilient rail. You're lucky it wasn't a 5v or 12v power rail or you would have been &&^&@@.

This is an 820-2915 board so it will be fried soon enough anyway without any of your intervention.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 300