주요 콘텐츠로 건너뛰기

2011년 상반기 모델, A1278 / 2.3 GHz i5 또는 2.7 GHz i7 프로세서.

778 질문 전체 보기
질문 마감됨

I need to buy a new case my have had a bump

I would like to change the case of my Mcbook Pro 13, on the screen side of the case it got hit on the right upper corner but the screen is not broken. I would like buy the part is possible.

Thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

It sure is possible, depending on where the damage is and which part you mean:

MacBook Pro 13" Unibody Lower Case

- Apple Part #922-9064, 922-9447, 922-9779, 923-0103

MacBook Pro 13" Unibody (Early 2011-Mid 2012) Upper Case

- Apple Part #661-5871, 661-6595, 661-6075

If the dent is on the display assembly rather than the lower case, you might want to keep the dented display as long as the display still works. Unibody MBP display assemblies are usually sold as complete units; the back case and bezel for the display assembly are fairly rare as separate parts. Disassembling a Unibody display assembly is an ugly job; don't do it if you don't have to...

If you need to replace the entire display assembly after a video failure, that part is also available:

MacBook Pro 13" Unibody (Early 2011-Late 2011) Display Assembly

- Apple Part #661-5868

MacBook Pro 13" Unibody Lower Case 이미지

상품

MacBook Pro 13" Unibody Lower Case

$39.99

MacBook Pro 13" Unibody (Early 2011-Mid 2012) Upper Case 이미지

상품

MacBook Pro 13" Unibody (Early 2011-Mid 2012) Upper Case

$39.99

MacBook Pro 13" Unibody (Early 2011-Late 2011) Display Assembly 이미지

상품

MacBook Pro 13" Unibody (Early 2011-Late 2011) Display Assembly

$89.99

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

It was a very helpful answer. Thanks a lot

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 92