메인 콘텐츠로 스킵하기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

3347 질문 전체 보기

I phone 5 replaced screen three times and is still unresponsive

I have replaced my screen and lcd on my iPhone 5 after a drop the cracked screen was still responsive cracked but after I attempted to change it.It all lights up looked good but was unresponsive I tried three screens and retested them all on another phone they worked fine. I cleaned all the connection and reseated them numours times.Ive read the placement of the connector cover can cause a blue screen but not an unresponsive screen and the only thing I've found but is not the case could be a cracked mother board by the battery pull tab? Does any one have a clue?

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

Hey B mc

This is what I would do

1. Unplug battery, reset connections one more time and test screen. If the problem persists

2. Check for digitizer connector not missing any pins or being broken. If you do not have a microscope you can try taking a picture in good lightning and zooming in.

Let us know what you find out!

해당 답변은 도움이 되었습니까?

점수 0

댓글:

I tried it again and took a picture all the pins look good and are clean I unhooked the battery and hooked it back up. The only thing I'm not sure of the connector cover lower right screw mount (nut attached to the mother board has come off is there anything that passes under it that could have been broke everything I read says it would cause blue or black screen?

의 답변

Check for any missing components. remove black sticker by connectors and check carefully

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

B mc 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 64