The ignition key mechanism won't turn off or release key. I have been removing fuse to shut her down... It is stuck in "on." Turning of the steering wheel to relieve locking does not seem to help.
Any suggestions would be appreciated
Scott
좋은 질문 입니까?
평판: 33
3
1
Depending on the year there is a small hole which you stick a paper clip into next to the key hole. Pushing the clip in and turning the lock set toward accessory will allow the whole lock set to be removed.
해당 답변은 도움이 되었습니까?
Then you can push the key out from the back side of the lock.
Some old cars with the key on the steering column would ‘lock’ the key in if the wheels were turn all the way to the left or right, such as when parallel parking. You had to pull the steering wheel real hard in the opposite direction while simultaneously turning the ignition.
해당 답변은 도움이 되었습니까?
Have 88 gmc truck wheels r straight and turn and key will not turn off
Do as Frankie advised you, I had the same problem a few years ago and that did the trick.
해당 답변은 도움이 되었습니까?
My "new" 88 GMC C1500 just started doing this. Will the steering wheel yank work forever or do I need to replace ignition or...?
How do you fix that on 1998 silverado c1500 have to turn wheel Wich is hard all the way to the left to turn over the key and when you do hearing clicks
24 시간 전: 6
7일 전: 31
30일 전: 137
전체 시간: 13,665
Have 88 gmc truck key stuck in ignition in on position and won’t come out tried everything disconnected battery to start power
Tom mc 의
I've had the same thing happen, I've had luck twisting the key partially int the start position the back to off. the permanent solution is a new ignition cylinder
Casy Chapin 의