평판: 11
1
I replaced the screen on my gold 6 plus, I decided to put a black screen on Iit and everything went well until I turned the phone on and the screen was unresponsive to touch. Before complete installation I did test the screen and it worked . The screen has light lines running down the screen please help
좋은 질문 입니까?
평판: 102.5k
18
191
304
I would take the phone apart again and get it to were it worked before then re assemble slowly and with care checking when possible if it works to know when things go wrong.
해당 답변은 도움이 되었습니까?
평판: 2.2k
4
4
1
Sounds like the digitizer flex cable or socket on the board may be damaged. I would inspect those areas under a microscope.
해당 답변은 도움이 되었습니까?
Could also be a short , did you put all the insulating tape back on?
When I extend the flex cable while it's plugged in the screen becomes clearer, but still lines going through
평판: 1
5
4
Your digitizer flex isnt properly plugged in most likely.
해당 답변은 도움이 되었습니까?
When I extend the flex cable while it's plugged in the screen becomes clearer, but still lines going through
평판: 109
3
2
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 328
댓글 2개
Does the home button work?
Jimfixer 의
I didn't attach the home button backing plate yet because I have a stripped screw and ordered a new plate, but the touch id was still funtioning
Josh B 의