주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 5.5” 스크린 iPhone은 iPhone 6의 큰 버전입니다.

1525 질문 전체 보기
질문 마감됨

iPhone 6 plus, LCD replaced, cannot restore - error 4005

Hy everybody,

I have Iphone 6 plus, that worked perfectly before lcd replacement. Since I broke my lcd, I put home button by a side and ordered new lcd.

I assembled the phone, but I cannot restore it. Itunes detects iphone in recovery mode (or in dfu if I connect it in dfu mode). After that, there is an apple logo shown on the iphone screen and "waiting for iphone" message in itunes. Few minutes after, there is a message "Iphone cannot be restored" and That's where I'm stucked.

I tried another PC, new cable, disabled antivirus, everything I could. I don't have my old screen since I threw it away right after I broke it.

Could this problem be related to the replacement part? Anyone has any idea?

Update (09/25/2015)

I tried without whole front assembly (lcd) and I have the same problem.

Don't know what this could be?!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

Make sure you did not tear any flex cables of any kind. Doing this can cause many errors included the one you are currently having.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

I have a iPhone 6 Plus was same your error because i change my LCD :(

now i cant restore and itunes detect it in DFU mode only.

Tôi nghĩ là bị đứt mạch dưới mấy con ốc mà không biết sửa làm sao nữa.. restore toàn dính lỗi 4005 :(

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 486