Adhesive goes inside the lcd

Question

Apple iPhone

iPhone을 직접 수리하는데 필요한 모든 것! iFixit에는 모든 iPhone의 무료 수리 안내서 및 분해 정보는 물론 은하계 최고의 교체 부품 및 도구가 있습니다.

36457 질문 전체 보기

질문 마감됨

aqi @aqi

평판: 1

3

1

게시일: 2015년 10월 4일

옵션

Adhesive goes inside the lcd

Hi guys, i fix phones for living

Well, whenever I replace the glass on iPhone LCD, loca goes between the screen and back light and it always indicate obviously glue underneath,

So I remove the back light and put a faulty light on temporary bases, and after sticking the glass just solder them back together but it make me annoying sometime cleaning and soldering again Nd again,

Can any give me solution for that please

Regards

Aqi

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

선택된 답변

Alexander Schmidt @alexandersc1346

평판: 243

5

3

1

게시일: 2015년 10월 4일

옵션

The solution is called "OCA".

Do not confuse it with "LOCA"!

While LOCA is a Liquid adhesive, OCA is like a sticker.

You will need one to two machines to attach it, but its worth the money.

Just look at YouTube for "iPhone OCA" and you will get the rest.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 2개:

I know bout OCA in which you need autoclave for removing bubbles but it's not studying me as when you drop your phone with OCA adhesive on LCD , there are changes you brake the screen quickly, or when it's already changed the glass with OCA and you break the glass again, hard to remove the OCA again.

That's why I like LOCA. You can put as much shock absorbing in that as much you can't do with OCA

aqi 의 2015년 10월 6일

You can also use some "tricks" to stop running LOCA between LCD and backlight:

First trick is:

Silcer Conductive Paste, as seen on this youtube-video:

watch?v=4DXHbPMoXG8

Second trick ist:

Use some "dough" (like play-doh) to seal the gap between backlight and LCD, then use LOCA and after curing under UV-Light, remove the play-doh (dough).

You could also use some sticky tape to seal the gap between LCD and Backligh to prevent LOCA running in between...

Alexander Schmidt 의 2015년 10월 8일

댓글 달기

I know bout OCA in which you need autoclave for removing bubbles but it's not studying me as when you drop your phone with OCA adhesive on LCD , there are changes you brake the screen quickly, or when it's already changed the glass with OCA and you break the glass again, hard to remove the OCA again.

That's why I like LOCA. You can put as much shock absorbing in that as much you can't do with OCA — aqi
You can also use some "tricks" to stop running LOCA between LCD and backlight:

First trick is:

Silcer Conductive Paste, as seen on this youtube-video:

watch?v=4DXHbPMoXG8

Second trick ist:

Use some "dough" (like play-doh) to seal the gap between backlight and LCD, then use LOCA and after curing under UV-Light, remove the play-doh (dough).

You could also use some sticky tape to seal the gap between LCD and Backligh to prevent LOCA running in between... — Alexander Schmidt