기기를 수리하세요 커뮤니티 상점

모델 M2453 또는 M6411 / 300, 366, 또는 466 MHz G3 프로세서

64 질문 전체 보기

옵션

Why can't I install OS 10.3 in this clamshell?

This machine (192 MB RAM) is currently running OS 9.2. Works beautifully. I have updated it with Firmware 4.1.7 update. Verified it as its Boot ROM is now 4.1.7f4. I booted off a cd 10.3 installer but after a few minutes of hard drive activity, I get a kernel panic. Tried it several times, I get the same result. Sometimes, what I get is a message that tells me I need to reboot the computer, blah blah blah, etc. I know this cd works. And 192 MB RAM maybe small, but it should have worked. What gives?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 1개
댓글 달기

답변 5개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Are you sure you are using a retail disk (black) and not a machine specific (gray)?

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

+ very good guess

의

댓글 달기

옵션

I could try resetting the PRAM. When you turn the computer on hold "Command[Apple]+Option+P+R" all at once, and keep holding it until it makes the boot noise twice. THen try and run the installation again.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

Thanks, Chris. But resetting the PRAM did not change anything. Sigh

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

Yes, I'm sure the cd disk works, because I used it to install 10.3 in another clamshell weeks ago. Sadly that clamshell got inundated by a flood. It was a total loss, the water corroded many components inside. Mayer, thanks for the link. Although the Apple article mentions Powermac G3s as the affected models, I suspect a few clamshells were also involved. Thanks to all who responded.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

Try replacing the ram with the ram from the other G3.

의

댓글 달기

옵션

Yes, I've already changed RAM, even tried the 512 MB stick from another clamshell. Still no dice.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Bernie 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 878