주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기

My proximity sensor doesn't respond

I recently replaced a cracked touch panel/digitizer on an iphone. Everything works, the home button, speaker-everything except the proximity sensor. When you make calls, the the iPhone doesn't go blank, as it should, when you make calls. It's not responsive at all. Has anyone else had this problem?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 3개

선택된 답변

check cable no 3 is seated right

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

If you need to replace it (#3 ribbon), see this:

iPhone 3GS Proximity Sensor Ribbon Replacement

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

done, but it doesnt still work.

birghtness sensor works, but proximity nope.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

AshD 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,214