주요 콘텐츠로 건너뛰기

모델 A1278, 2012년 6월 출시. Turbo Boost가있는 Intel 프로세서, 최대 512 MB DDR5 비디오 RAM

1622 질문 전체 보기
질문 마감됨

No sleep and camera after spilling

Few weeks ago i spilled hot tea on my macbook pro, i taked out the whole macbook apart and washed in warm water & alcohol the keyboard and backlit...

after that assembled everything together, and the keyboard was bad i was pressing one button another one was responding, the trackpad had only a right click and the power button didn't worked to...

i buyed a new keyboard and a trackpad, assembled them and everything was ok till i closed my macbook...

the macbook didn't fall asleep after closing the lid, but it's sleeping when i press the power button or a manual sleep from the menu...

i received a facetime call today and when i answered it was no camera, and checked into photobooth it says no camera connected...i tried reconecting the camera cable but still the same...

i would appreciate the help for solving this, thanks :)

ps. i changed the hdd/ir sensor cable

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 3개

It seems that the sensor detecting the lid closing and the motherboard connector for the facetime camera have been damaged. Have you seen any corrosion damage around these parts of the motherboard?

On a side note I would recommend that you use isopropyl alcohol and no water to clean the internal components of any computer as corrosion can travel within the soldering and might be damaged without any visible clue and using water could aggrevate the problem.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

I havent deteced any corrosion on the board, i tooked some pics if you could see

And what other sensor it could be for the sleep ?

댓글 달기

Block Image

Block Image

Block Image

Block Image

here are some photos i took, i suspect the battery indicator causing no sleep...

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

any help or idea for further repair ?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 97