주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기
질문 마감됨

Volume up and ringer buttons not working

My iphone fell off my desk. Volume up and ringer not working anymore. Volume down is working fine. The device is silent. All sounds work perfectly and when toggling silent through software, silent and unsilent modes work normally. No visible damage happened to the exterior of the iphone at all .

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

The shock could have damaged the button or the ribbon cable that connects the buttons to the motherboard. I had the same issue with the power button.

This guide will show you how to replace the cable/buttons: iPhone 4 Volume Button Replacement

iPhone 4 Headphone Jack & Volume Control Cable Replacement

iPhone 4 Volume Button 이미지

안내서

iPhone 4 Volume Button Replacement

난이도:

어려움

iPhone 4 Headphone Jack & Volume Control Cable 이미지

안내서

iPhone 4 Headphone Jack & Volume Control Cable Replacement

난이도:

어려움

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

Should i change them both or just the buttons. Since the volume down is working, doesn't this indicate that the cable is working ??

The ribbon cable is very fragile, maybe a junction with the volume up button broke, but that is something that can only be tested when the phone is open. You could remove the physical buttons place the battery back and then push with a pen or so on the switch to see if it works then.

If not, the cable has to be changed.

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 156