주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

15" Behringer speaker removal

How do I remove a 15" speaker from a plastic Behringer enclosure?

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

Should be pretty straight forward. Typically the screws are on the front holding both the grill and driver in place. There might be some gasket or adhesive holding the speaker in place.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Not straight forward, there are no screws..., I finally discovered that the front grill has to be gently pried up a little at a time from many points around it's circumference. A small thin putty knife worked well for me. A screwdriver could damage the plastic edge around the grill. Re-installed using a wooden mallet and again going around the circumference at various points tapping very gently.

That's scary that they are just pressure fitted on there . Odds are that they would vibrate out as the enclosure ages.

Yes, that is exactly what I am thinking. Everything was fine until I found it out, now I keep waiting for one of them to 'fly off'! Thanks for your post.

의견 추가하세요

귀하의 답변을 추가하십시오

David Lawrence 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 8

전체 시간: 351