주요 콘텐츠로 건너뛰기

iPad 2세대, Wi-Fi, GSM 그리고 CDMA 모델이 있습니다. iPad 3 출시 전에 일부 모델을 새롭게 하였습니다. 수리는 어렵고 열과 비집기가 필요합니다.

730 질문 전체 보기
질문 마감됨

Screen goes off when the back is tapped

I have an ipad2 wifi, works fine except if you tap it in certain places the screen goes off and you have to press the lock button to wake it up again.

no visible damage on the chassis but asking the owner (he's asked me to fix it) says it goes off if you tap near the ribbon cable area (left hand side bottom half) mostly.

i suspect a faulty ribbon cable to lcd but also think it could be a faulty lock button shorting?

any ideas?

thanks

dyfed

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

I would probably say the same thing; those LCD cables seem to want to fall off to no end.

Not sure if you've ruled this out already, but it's good to cover all bases: It might be the auto-lock feature. If you can consistently replicate the problem though, with auto-lock off, I'd just remove the digitizer and reconnect the LCD cables.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 41