평판: 465
7
5
Replaced the glass on an S3 and changed the frame. when the back plate is on (the one that screws in) the battery cover won't clip in and there's a gap because of this
does anybody know why?
it's doing it on the old frame as well, and tried a different battery cover
좋은 질문 입니까?
평판: 2.2k
10
4
3
If the frame is not the exact one, for example the i535 frame will only work with the i535 motherboard. The motherboards are slightly different but can still fir i would check this first(see below)
https://www.gazelle.com/thehorn/wp-conte...
for example this one is the T999. You find this by taking the model number and remove the first 3 letter and the dash.
해당 답변은 도움이 되었습니까?
the motherboard fits fine
Double check it may fit fine but there are differences, I fought with this issue before and I am sure thats the issue. what was the frame number on the old one and the new one?
Turns out the frame is defective. just going to replace the frame, i have a frame seperator so it's not an issue
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 62
