주요 콘텐츠로 건너뛰기

Model A1288 / 8, 16, or 32 GB capacity

451 질문 전체 보기

Newly Installed battery won't charge

I just replaced the internal battery successfully using the guide here, but I noticed that the battery doesn't go above 8%. I bought the battery at this website. It's stuck at 8% for more than 2 hours and it says its fully charged (plug icon on battery)

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

prior to battery failure, nook fell on floor while charging, hitting on the charger plug. Could this cause the new battery not to charge correctly?

댓글 달기

답변 1개

가장 유용한 답변

I would just make sure that the battery cable is sitting flat and that any of the connections are not touching the board but only the contact. If the cable is not put on perfectly it can cause it to not fully charge up.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

unknownboy95 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 700