주요 콘텐츠로 건너뛰기

2015년 3월에 발표, 2015년 4월 10일에 출시된 Galaxy S6은 Galaxy 라인의 다음 주력 제품입니다. 곡선형 스크린 버전은 Galaxy S6 Edge로 알려져 있습니다.

487 질문 전체 보기

No power after water damage repair

Dear all,

Samsung Galaxy S6 had been dropped in water - I did the usual clean and replace battery but still no power and no life from the usb connection.

The board looks good, although I havn't disassembled the daughter board as I'm expecting the device to at least vibrate once a good battery is connected to the main board.

Any ideas/advice?

I've got a daughter /dock connector board on order but I'm wondering how I can test/identify why no power is hitting this phone when all seems well?

Thanks!

Will

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

가장 유용한 답변

By usual clean what do you mean? A proper water damage repair cleaning can be quite different than the standard cleaning methods, there is likely some underlying corrosion under any EMI shields that might be prohibiting the device from functioning. You could also (likely) have blown some fuses that disallow a boot.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

Sorry, I mean a 99.9% isopropyl bath and brush after removing all components and emi shields (except the daughter board).

I couldn't see any obvious damage to any fuses or capacitors but is there any test I can perform to detect any possibilitis?

I have very limited knowledge on microsoldering but you could use a multimeter to check the resistance of components and identify where the short is.

you have to get out the microscope and examine the board carefully. pay close attention to the battery connector plug area on the motherboard. Look for any signs of corrosion. You can also try changing out the power ic (there are 2 that commonly fail, youtube video by deep fix shows replacing one of them)

댓글 달기

귀하의 답변을 추가하세요

Will 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,195