2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

3322 질문 전체 보기

shield screws mixed up

Hello

Hopefully you can help me

Change an iPhone 5 screen the other day but got the 3 shield screws mixed up. I've got the non magnetic one on underside of the motherboard but could only put a magnetic one on top . Also the other 2 are just random small screws .

How could this affect my phone

Also could I just purchase the 3 correct screws from you

I could buy a bag in eBay but if I got the whole set of screws I'd never know what 3 I needed

Can you help me please

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

3개의 답변

가장 유용한 답변

The lower right one is the most important, if you use a screw that is too long you could strip the logic board grounding copper out and be left with a blue screen of death (BSOD) that renders the iPhone useless until repaired with microsoldering.

If you have a digital caliper I would recommend using that to measure the screws, correlate with the iFixit guide on the length and there's your fit.

iFixit doesn't sell the screws in question you need individually, except as a whole bag unit unfortunately. :-/

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

Thanks for that

What's the length of those 2 at the bottom. I can at least make sure they are the right length

Thanks

해당 답변은 도움이 되었습니까?

점수 0

댓글:

According to our guide it is 1.2mm. Fortunately both bottom screws are the same, so as long as you have the upper right correct you're in the clear!

iPhone 5 Screen Replacement

의 답변

의견 추가하세요

non magnetic is always top right. i would love to know why this is. somebody please tell me, it has been killing me for ages.

whenever you're in doubt just look at what it's screwing into. If that screw is going into a standoff then you're going to want the long screw, if it's going into the logic board then you want the short screw.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

That's because the compass module (chip/fuse/whatever?) is housed there. Magnetic would throw it off :P

의 답변

I finally have an answer... everytime I remove that screw I ask myself this question. Thank you!

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

lee ball 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 16

전체 시간: 1,401