주요 콘텐츠로 건너뛰기

GSM version of the fourth generation of iPad released November 2, 2012. Model Number A1459 / 16, 32, or 64 GB

43 질문 전체 보기

iPad 4 after Digitizer replacement some areas don´t react

Hello guys,

i replaced my iPad 4 front panel after it was broken but now i have the problem that the new digitizer only reacts at the top and bottom area, in the middle of the screen it doesn't response. I thought the Digitizer is damaged so i took a new one but same problem only in different areas.

What can it be? Is it again maybe a damaged digitizer or maybe a short circuit some where or something else?

Really appreciate if you can help me out.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Most likely the digitizers your using are from third party vendors, and you're having third party problems. I would try a quality digitizer. It is possible that you've damaged the alligator connector, while assembling it

iPad 4 Screen Digitizer Assembly

iPad 4 Screen Digitizer Assembly 이미지

상품

iPad 4 Screen Digitizer Assembly

$39.99

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Thank you for your help. I will try a new one.

댓글 달기

귀하의 답변을 추가하세요

fuad1177 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 98