주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기

iPhone 5 Pentalobe Screws Spinning

I have refurbished an iPhone 5 into a "6 mini" housing. Done a few of these, no problems. Had to change the battery in one as it could of done with a new one, one of the screws wouldn't come out and now it spins (so not stripped) but turns to a certain point then clicks

any suggestions? don't really know what else i can do.

no access to the screw other then a screwdriver.

i've used a magnet to make the screwdriver stronger but it didn't work

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

Try prying up on the screen just slightly as you try turn it out. Sometimes that can push the screw against the edge and get it to come out.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기
가장 유용한 답변

Well. The issue is that the threads of the screw are stripped. Inside the device. So, you could try super gluing your driver to the screw end, and seeing if you can pull it out, probably quickly

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

That would just make it worse, thanks though.

댓글 달기

귀하의 답변을 추가하세요

James Carter 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 461