Skip to main content

What could prevent a battery from being recognized by the computer?

HI there,

I have a MacBook Air ("Core 2 Duo" 1.86 13" (NVIDIA) , Late 2008 - MB940LL/A - MacBookAir2,1 - A1304 - 2253*) which was plugged in when my friend's house was hit by lightning. When I got it, the battery indicator said Replace Now, so I did that and noticed that the battery was very swollen and should be replaced. The thing is that it works fine when plugged into the wall, but the battery indicator says "No Battery". So, I thought I must have bought a bad battery. So I got another and installed it but it did the exact same thing. Then I thought, maybe it's a charging issue, so I also replaced the DC in board which didn't make a difference. The funny thing is that the machine will stay on for a few minutes when I disconnect the charger cord, which is showing green, btw, but won't boot without it attached. It was doing that before I replaced the DC board.

Any ideas what I am overlooking here? Remember there was a lightning strike involved. Or is that just a red herring?

Thanks!!!

Bodhi

Answer this question I have this problem too

Is this a good question?

점수 0
코멘트 추가

안드로이드 수리 키트

새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

지금 장보기

안드로이드 수리 키트

새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

지금 장보기

1개의 답변

Most Helpful Answer

Please download, run and report your findings using Coconut Battery: http://www.coconut-flavour.com

Was this answer helpful?

점수 1

댓글:

Hi Mayer,

THanks for that util, that is pretty handy. Unfortunately, it didn't really tell me much more info as it doesn't see any battery. I am seeing Current Charge, Maximum Charge and all other info as 0 or Unknown. I am not sure how to post the screenshot, but I have them... It doesn't even see the battery so I am not sure what to do next here...

의 답변

코멘트 추가

Add your answer

Mac Daddy will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 35