Skip to main content

모델 A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, 또는 2.4 GHz Core 2 Duo 프로세서

1473 질문 전체 보기

Looking For Pinouts for Sata Cable 820-2289-a

Hey guys! I've been looking everywhere for the wire configuration for of my old A1181 MacBook 13' laptop. I've included a few pics to make it a bit easier to know what i'm talking about.

I was just wondering If I could possibly make a Sata to USB connection myself. I have a data processor to run ith through in between now i just have to figure out if I can either use this one or look for something else. I found the computers schematics but it doesnt say much in terms of what the "k36 sata transfer board rev:a" does. anyone happen to know? any advice anyone?

Block Image

Block Image

Block Image

Block Image

Block Image

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2

댓글:

i have 4 yellow/gold wires and 2 blue wires and 3 red wires from a sata transfer board k36 i want to put a usb on it where do each wire goes on usb grnddata+ data- ,,POWER

의 답변

의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

1개의 답변

선택된 해법

SATA signaling is not directly compatible to USB ports. You need some conversion logic with your part is missing.

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

귀하의 답변을 추가하십시오

Manny O 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 108