주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

iPhone 6 Bent housing no signal/service

iPhone 6 housing bent and motherboard bent towards the bottom of the phone and motherboard, everything works except that it will not get any signal/ cell service. It works on wifi, but on the top where it usually says the carrier it keeps saying searching, even after I pull the SIM card out it keeps saying searching. No bents anywhere near the SIM card reader. Tried a different sim tray, network reset, opened the phone and checked all the connectors and components. I haven't done a restore on the phone. I believe it mind be hardware related because it happened when the phone got badly bent. Any suggestions on things to try or how I can fix the problem. Thank you

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 3
댓글 달기

답변 2개

가장 유용한 답변

Reflow the entire cellular section, reball the cellular chips if necessary.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

What does reflow and reball mean?

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Reballing is a method of soldering which requires balls to be placed underneath the chip. The process requires a de-solder and a fully equipped solder station. You have to desolder the cellular chip with a de-solder station and resolder it. Trust me it's a nightmare. You're gonna want to take it to a specialist or get a new phone.

댓글 달기

귀하의 답변을 추가하세요

Dewells 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 3,963